New Metal-ceramic, typical iron friction material designed for both dry and wet friction. Finer additives compared with K1 material are added to the base iron compound. AD” friction material is Lead and Asbestos free.

FEATURES:

• High static friction coefficient.
• Good abrasive resistance.
• High braking power to 500°C.
• very good binding strength between copper lined steel base plate and friction layer
• wearing rate by 20 % lower comparing with competitive sintered products of its category for common use
• Low abrasive interaction with the brake rotor material.
• Three(3) times +/- longer operational life compared to organic and Kevlar composite Materials.

Range of Application

• the material is suitable for dry and wet conditions for road/and off-road motorcycles; in road motorcycle application suited both for front/and rear brake while for off-roads we are recommending to use it for front brake
• The material is designed for common road riding application.

MATERIAL OPERATING PARAMETERS:

Specific pressure: P < 5.0 Mpa
Sliding speed: V < 40 m.s-1
Constant maximum temp.: 450°C
Short time maximum temp.: 700°C

Please Note - Picture is an example of a set of pads and not ones for any particular model