Plug and play headlight module - Fits inside the stock headlight bucket allowing you to turn the ignition of your bike on without having to have the headlight come on as well. Meaning that you no longer have to suffer the battery drain before you have the engine started.
Fitting this module can make the difference between riding home or having to call a recovery vehicle. This is especially true on the 2009-2015 EFI bikes where a slight drop in voltage (0.1v below threshold) will not allow you to start the bike thanks to the can-bus system.
The module is super simple to fit, it plugs in between the loom and the headlight using the standard H4 connectors. Take about 5 minutes to plug it in.
When you actually do want to turn on the headlight all you need do is flip the full beams on and off. The headlight will then remain on until you stop the bike and turn the ignition off.
Note that the small parking light is not effected in anyway by this module and remains functional as per normal.
Suitable for any bike with H4 headlights specifically here the Triumph Twin range from 2001-2015.Save time and money from waiting around for roadside recovery, Battery will last longer because now you can start the bike with headlight turned off. Protects HID headlight system, if equipped, from repeated power surge damage during ignition procedure OE plug design, no wire cutting/splicing, ensures excellent reliability Built with automotive grade wiring with exceptional heat and cold resistance, to ensure long-term dependability Prevents battery over drain during engine warm up.
Write an online review and share your thoughts with other shoppers!
Reviewer: Jake Ramos from Downey, Californa
It has worked wonders for my Triumph T100, starting use to be a hassle. With the easy start headlight module since its easy installation. Easy start allows plenty of power for starting and a simple flick of the high beam turns on the light. Best product I have purchased for my bike.
Reviewer: S from London
Great bit of kit.Fitted this to my EFI T100. The easy start headlamp control module automatically switches of the headlamp when starting saving the battery. Before fitting start your bike in front of a shop window and watch the headlamp power drain. This prevents power drain. Easy to install and easy to use.