New! H4 Hi/Low Beam (Bi-Xenon) 35w 6000K kit: For Triumph H4 Headlight Models:
Ultra Slim Digital Ballasts For Easy Installation.
This kit is for one H4 headlamp conversion. You will need two kits if you wish to convert both H4 headlamps.
This listing is for a PAIR of Halogen 100w/90w H4 bulbs.
The H4 bulb has double filaments inside the lamp and produces light for the MAIN and DIPPED beam headlamp functions.
The power of the MAIN BEAM light from this bulb is 100W ( normal bulbs are 60W )
The power of the DIPPED BEAM light from this bulb is 90W ( normal bulbs are 55W )
The power rating is actually the electrical power consumed by the light bulb and is not a true reflection of the light output.
Higher power consumption will in general mean more light output but the other factor to consider is the light colour ( also called colour temperature ). Some energy saving bulbs and street lights produce a very yellow light that is difficult to see detail in clearly. These bulbs however are designed to produce light with a colour temperature of 4000K which is a very sharp white light ideally suited to night driving.
In addition these bulbs have been optimised to reduce the amount of UV ( ultra Violet ) light produced. UV can damage plastic headlight lenses.
Packed in a rugged display case these bulbs are ideal as a spare pair of bulbs to keep in your vehicle etc. ( or you may choose to fit these and keep your original ones in the car as spares )
These bulbs are intended for off road and show use only.
These bulbs are E Marked (E4)
Remove the rubber cap from the back of the headlight and then remove the 3 way electical connector.
The bulb is held in place with a wire clip - release the clip and the bulb can then be removed.
When re-fitting the new bulb it is important not to touch the glass with bare fingers as this can lead to early bulb failures.
Write an online review and share your thoughts with other shoppers!