Triumph, DAYTONA 675 (to VIN 381274),
Triumph, SPEED TRIPLE (From VIN 210445 to VIN 461331),
Triumph, STREET TRIPLE R (From VIN 560477),
Triumph, STREET TRIPLE R (To VIN 560476),
Triumph, TIGER 1050 (From VIN 287504 to VIN 570058),
Triumph, TIGER SPORT (From VIN 570059 to 750469),
Triumph, TIGER SPORT (VIN from 750470)
|Triumph, DAYTONA 600 & 650,|
|Triumph, DAYTONA 675 (to VIN 381274),|
|Triumph, DAYTONA 955i (From VIN 132513) ,|
|Triumph, ROCKET III, CLASSIC & ROADSTER,|
|Triumph, ROCKET III TOURING ,|
|Triumph, SPEED FOUR,|
|Triumph, SPEED TRIPLE (From VIN 141872 to VIN 210444),|
|Triumph, SPRINT ST/GT (From VIN 208167) ,|
|Triumph, STREET TRIPLE R (To VIN 560476),|
|Triumph, TIGER 1050 (From VIN 287504 to VIN 570058),|
The Kit contains Stainless Steel pistons & Ancillary parts to Overhaul one caliper, you will need one kit for each front caliper.
If you have the facilities to rebuild your calipers at home, we can supply you with the parts you need below. This caliper overhaul kit contains:
2x 30mm Stainless Steel Pistons.
2x 34mm Stainless Steel Pistons.
4x Dust seals
4x Hydraulic pressure seals
1x Sachet rubber grease/silicone Grease.
2x caliper joint seals
1x stainless steel bleed nipple
1x dust cap
2x copper banjo washers.
Fits all Nissin and ''Triumph'' front 4 piston calipers on all (Apart from Bembo) Triumph sports and touring models. Kit contains 8 seals (4 outer dust seals and 4 hydraulic seals). To equilize brake pad wear, these calipers use 2 different piston sizes, 30mm (leading) and 34mm (trailing). Use silicone or rubber grease (Supplied) during assembly after cleaning out any corrosion from the dust seal groove. The joint seals on the 2 halves are now also included.
Write an online review and share your thoughts with other shoppers!