T595 1997The Kit contains Stainless Steel pistons & Ancillary parts to Overhaul one caliper, you will need one kit for each front caliper.
Daytona 955i 1998-2006
Daytona 750 1992
Daytona 1000 1992
Daytona 900 3 cyl 1993-6
Daytona 1200 4 cyl 1993-98
Rocket III all models
Speed Triple carb models 1994-97
Speed Triple EFi T509 885 & 995cc 1997-2001
Speed Triple 955 2002-04
Speedfour 600 2002-05
Sprint all carb models 1994-98
Sprint RS 1999-2002
Sprint ST 1999-2009
Thunderbird 1600 2009-10
Trophy 900 3 cyl 1994-2001
Trophy 1200 4 cyl 1994-2001
If you have the facilities to rebuild your calipers at home, we can supply you with the parts you need below. This caliper overhaul kit contains:
2x 30mm Stainless Steel Pistons.
2x 34mm Stainless Steel Pistons.
4x Dust seals
4x Hydraulic pressure seals
1x Sachet rubber grease/silicone Grease.
2x caliper joint seals
1x stainless steel bleed nipple
1x dust cap
2x copper banjo washers.
Fits all Nissin and ''Triumph'' front 4 piston calipers on all (Apart from Bembo) Triumph sports and touring models. Kit contains 8 seals (4 outer dust seals and 4 hydraulic seals). To equalize brake pad wear, these calipers use 2 different piston sizes, 30mm (leading) and 34mm (trailing). Use silicone or rubber grease (Supplied) during assembly after cleaning out any corrosion from the dust seal groove. The joint seals on the 2 halves are now also included. Sorry, Due to Rhos/EPA limitations we cannot ship braking, suspension, or exhausts to the USA or Canada.
Write an online review and share your thoughts with other shoppers!